HomeShop OnlineSpecialsShipping/PoliciesContact Us
    Back 

Shop Online
Trigger Springs for Rifles
Gunsmithing Odds and Ends
Accu-Risers
" Pillar Align" Pillar Installation Tools
Aluminum Pillar Bedding Kits
 

Browning A Bolt and A Bolt 22 Hunter Trigger Spring


   Lighten your rifle trigger pull.  On average, installation of this spring will reduce your factory triggers weight of pull by 1¼ to 1¾ lbs. with no other changes.  The exact amount of creep, overtravel and weight of pull are dependent upon the type and amount of tuning accomplished by your gunsmith.

   This is a very easy spring to install, but first be sure that the gun is unloaded.  Then remove the front and rear trigger guard screws, and remove the barreled action from the stock.  Now to replace the trigger spring, push out the trigger pivot pin, and push the trigger forward so that the original spring can be removed.  Replace it with the new spring, and re-align the trigger with its pivot pin hole, replace the pivot pin, then check the operation of the trigger by closing the bolt and dry firing.  Now repeat this operation with the safety on to be sure the safety is functioning.  When you are confident that the trigger and safety are functioning reliably, reassemble into the stock.  We always recommend that the reliable functioning of your trigger and safety also be checked by a gunsmith.


    For photos and installation instructions, click  on Gunsmithing Odds and Ends, below then scroll down to #11.

Gunsmithing Odds and Ends


   
   IF YOU WANT A LIGHTER TRIGGER PULL, YOU NEED A LIGHTER TRIGGER SPRING!

  
No liability is expressed or implied for damage or injury which may result from the improper installation or use of this product.



Item #001


Regular price $7.95 

  Back