Tikka T-3, M-595 & M-695 Hunter Trigger Spring
Lighten your rifle trigger pull. On average, installation of this spring will
reduce your factory triggers weight of pull by 1¼ to 1¾ lbs. with no other changes. The exact amount
of creep, overtravel and weight of pull are dependant upon the type and amount of tuning accomplished by your gunsmith.
Picture #1 | 
|
In order to gain access to this trigger spring, your gunsmith will first remove the large screw
which attaches the trigger assembly to the receiver.
In picture #1
identify the 3 small parts which have been removed from the trigger assembly, from left to right, these parts are, the trigger
spring plunger, the trigger spring, and the weight of pull adjusting screw.
When replacing these parts into the trigger housing, care must be taken that the trigger spring plunger
faces in the same direction as when it was removed. The weight of pull screw is the only adjustment available (
or necessary ). This trigger, and these springs work well with
each other. Together, they provide a great trigger pull.
Picture #1 also shows the metric allen wrenches necessary to install and adjust this spring.
IF YOU WANT A LIGHTER TRIGGER PULL, YOU NEED
A LIGHTER TRIGGER SPRING!
No liability is expressed or implied for damage or injury which may result
from the improper installation or use of this product.
Item #029
|
