Remington M-721 and M-722 Target Trigger Spring
This spring fits all Remington M-721 and M-722 triggers.
Remington M-721 & M-722 Trigger
Lighten your rifle trigger pull. On average, installation of this spring will reduce your factory triggers
weight of pull by 1½ to 2½ lbs. with no other changes. The exact amount of creep, overtravel, and weight
of pull are dependant upon the type and amount of tuning accomplished by your gunsmith.
These triggers need special attention to keep them clean. Use a cleaning rod guide to protect the trigger from barrel
cleaning solvents and oil. Do not spray aerosol lubricants directly into the trigger. Over time, many of these
products will get sticky and retard the free movement of the trigger and sear within the trigger housing. ESPECIALLY
IN COLD WEATHER.
Any rifle which may have an accumulation of dirt and oil in the trigger
housing should be cleaned by a gunsmith before any springs are changed or adjustments are made.
IF YOU WANT A LIGHTER TRIGGER PULL, YOU NEED A LIGHTER TRIGGER SPRING!
No liability is expressed or implied for damage or injury which may result from the improper
installation or use of this product.