Browning X-Bolt Hunter Trigger Spring
Lighten your rifle trigger pull. On average, installation
of this spring will reduce your factory triggers weight of pull by 1 to 1½ lbs. with no other changes. The
exact amount of creep, overtravel and weight of pull are dependant upon the type and amount of tuning accomplished by your
Browning has designed
this trigger assembly in such a way that the entire assembly must be removed from the receiver in order to replace the weight
of pull spring. It cannot be replaced by simply removing the weight of pull screw. (The weight of pull screw location
is shown by the allen wrench in the picture). If you are not familiar with rifle triggers, and how they work, this might
be a job best left to your local gunsmith.
For photos and installation instructions, click on Gunsmithing Odds
and Ends, below then scroll down to: #12 GunsmithingOdds and Ends
No liability is expressed or implied for damage or injury which may result from
the improper installation or use of this product.